Liberate your music.
With acoustic-grade MDF cabinets, 3.5″ paper cone drivers and 1″ silk-dome tweeters, the YARO2 speakers deliver wonderfully natural and detailed sound.
YARO2’s user-friendly interface features a single knob. Simply rotate for volume, push the knob in to cycle through the three inputs, or push and hold for two seconds to activate and deactivate standby mode.
Complete with a black piano-gloss finish, the YARO2 amplifier and speakers were designed to look as great as they sound.
YARO2 features high quality binding posts for a quick and simple setup. This standard wiring system gives you the freedom to choose exactly how much speaker wire is used in order to keep cable clutter to a minimum.
Along with a 3.5mm AUX input, the YARO2’s high performance 24-bit DAC allows you to connect your digital devices via USB or Optical for truly exceptional sound. For those wanting to really feel the bass, connect a subwoofer via the SUB OUT port.
Isolate yourself from external noise by plugging your headphones into the 3.5mm port, conveniently located on the front of the YARO2.
Equipped with volume, input, tone and balance controls, the YARO2 remote gives you full control over your audio. It also features playback buttons, allowing you to pause and skip tracks when the USB input is being used.
WHAT’S IN THE BOX?
YARO2 comes complete with speakers, amplifier, a power cord, speaker wire, USB cable, Optical cable, AUX cable and a remote control with batteries, providing everything you need to get up and running. Manuals and rubber feet are also included.
Rotate the 360 degree image below.
Tweeters: 1″ poke resistant silk dome
Woofers: 3.5″ paper cone
Amplifier Type: Class D
Nominal Impedance: 4 Ohm
Sensitivity (1W/1m): 86 dB
Frequency Response: 60 Hz – 20 kHz
Total Harmonic Distortion: < 0.1%
Crossover System: 2-way
Crossover Frequency: 2.3 kHz
Inputs and Outputs
Inputs: 1 x 3.5mm mini-jack AUX | 1 x USB DAC | 1 x Optical (TOSLINK)
Outputs: 1 x Subwoofer | 1 x 3.5mm stereo mini-jack
Speaker Terminals: Left and Right Binding Posts
Input Voltage / Frequency: AC 100V – 240V, 50/60 Hz (Auto Switching)
Input Sensitivity: 450 mV
Power Output: 120W Peak Power (60W Total RMS)
Standby Power Consumption: < 0.5 W
Weights and Measurements
Dimensions (Amplifier): 6.4” W x 7” D x 2.2” H (16.3 x 17.9 x 5.5 cm)
Dimensions (Speakers): 6.4″ W x 7″ D x 8.7″ H (16.3 x 17.9 x 22.2 cm)
Net Weight (Amplifier): 1.5 lb (0.7 kg)
Net Weight (Speakers): 12.4 lb (5.6 kg)
Gross Weight (Set): 19.2 lb (8.7 kg)
Shipping Box Dimensions (Set): 16.7″ x 15.9″ x 9.8″ (42.5 x 40.5 x 25 cm)
What’s in the Box?
Remote with batteries
USB DAC Cable
Make sure to check back here often whenever installing (or reinstalling) your product to make sure that you have the most up to date manual. Changes could include ratings, installation procedures, etc.
Why should I only buy from an authorized Kanto reseller?
When it comes to customer service, we set the bar exceedingly high. Commitment of this level requires us to work closely with all our online and in-store retailers, so that we may ensure our customers receive the type of experience we try so hard to deliver.
If you are interested in purchasing a Kanto product, we encourage you to shop through one of the many authorized dealers listed above. This not only guarantees the quality of your purchase, but also gives you the benefit of our warranty should any issues arise. While we strive to support all our customers, we unfortunately cannot always provide assistance for products sold through unauthorized third parties.
If you are unsure if you are purchasing from an authorized retailer, please contact us toll-free at 1-888-848-2643 or email us at firstname.lastname@example.org.